Author Archives: Dave Janney

New TapRooT® for Audits course to debut August 1-2, 2016

Posted: March 21st, 2016 in Courses, Quality, Summit, TapRooT

We are pleased to announce the first TapRooT® course for auditors. We will debut this course as a pre-summit offering before the 2016 Global TapRooT® summit.

TapRooT® is the best method for performing investigations and doing root cause analysis. But wouldn’t it be better if you never had to do the investigations in the first place? Of course, and that is why auditing is so important.

Sadly, most companies take the time and resources to do audits but do not get the desired results. Why? Because corrective actions are developed without proper root cause analysis. That is where TapRooT® comes in.

TapRooT® can be used to perform root cause analysis on any problem, so why not find the problem and do root cause analysis before these problems manifest themselves into incidents? We decided to develop a course for auditors and audit participants to see how TapRooT® works, both reactively, and with audits. Regardless of your role in the audit process, you must understand the entire TapRooT® process to be effective, so this course is for anyone involved in auditing, from auditors themselves, to auditees, to management who is responsible for improvements. Here is the agenda:


TapRooT® Process Introduction and Initial Audit
SnapCharT® and Exercise
Causal Factors, Significant Issues and Exercise
Root Cause Tree® and Exercise
Generic Causes
Corrective Actions and Exercise


The Root Cause Tree® and Preparing for Audits with Root Cause Exercise
Audit Programs, Trend and Process Root Cause Analysis
TapRooT® Software Introduction
Frequently Asked Questions about TapRooT®
Final Audit Observation Exercise

Participants in the course will receive a copy of the new book, “TapRooT® Root Cause Analysis for Audits and Proactive Performance Improvement.”

We hope to see you in the course! To register:

REGISTER for this course and the 2016 Global TapRooT® Summit (August 1 – 5, 2016).

REGISTER for this 2-day course only (August 1 – 2, 2016).

Safety Track at the 2016 Global TapRooT® Summit

Posted: March 21st, 2016 in Best Practice Presentations, Best Practice Presenters, Summit, TapRooT

We are busy preparing for this year’s summit, which will be held August 3-5 (with pre-summit courses on August 1-2) in San Antonio, Texas.

I’m very excited about the lineup for this year’s Safety Track. We have some great speakers and topics:

7 Deadly Sins of Human Performance – Mark Paradies, Creator of TapRooT®

Weatherford’s Global Journey to HSE and Quality Improvement with TapRooT® – Mitch Miller, David Smith, Shawn Holden

Proactive Use of TapRooT® – Dave Janney

Interviewing Behaviors & Body Language – Barb Phillips

Marathon Galveston Bay – Ken Bloch

Arc Flash Loss Prevention – Scott King and Terry Butler

TapRooT® in What If Analysis – Joel Solomon

In addition to the speakers in the safety track, all tracks with attend the keynote sessions each morning and afternoon, with top-notch speakers. We also have the famous Wednesday night reception with great food and drinks and featuring live entertainment from Carl Dixon (of the Guess Who, April Wine, and Coney Hatch). And the best part of the summit? Getting to meet other like-minded professionals; we hear every year from attendees that the Global TapRooT® Summit is the best networking opportunity of the year.

So please join us for the Safety Track at this yea’s summit. For more information and to register, go HERE

See you in San Antonio!


5 Day TapRooT® Advanced Root Cause Analysis Team Leader course in Dubai

Posted: February 14th, 2016 in Courses

Dr. Sami Amarneh and I are teaching the 5 day course this week in Dubai. Here are some pictures of day 1.

It started with an unbelievable sunrise (my iphone pictures do not do justice):


Picture of Sami teaching:


And pictures of students working on their first exercise:




Why not join us for a future course? You can see the schedule and enroll HERE

Root Cause Tips – What Should You Investigate?

Posted: January 13th, 2016 in Investigations, Root Cause Analysis Tips
night-office-shirt-mail copy

What if you have more than you can possibly investigate?

Hello and welcome to this week’s root cause analysis tips column.

One of the questions I am asked often is “what should we investigate?”

The answer is it really depends on your company, your numbers, and your resources. I have some ideas, and these apply to anything, but I will use safety as an example.

First of all, your company may have a policy on what has to be investigated; for example, all lost time injuries or all recordable injuries. So you already know you are required to do those. But what if something is not required?

What I say is investigate as much as possible based on your numbers and your resources. If you work at a site that has 10 injuries a year but only 2 are recordable, if you have the resources to do all 10, I certainly would. It is likely the only difference between the 2 and the other 8 is……LUCK.

What if you have more than you can possibly investigate? Then you should do a really good job at categorization, and do investigations on the TRENDS. In other words, I would rather have you do one really good investigation on a trend than dozens of sub-standard investigations. You will use less resources but get better results.

How do you do an investigation on a trend? It is really very simple – instead of mapping out an incident with a SnapCharT®, you map out the process. You can leave the circle for the incident off the chart or you can make the circle the trend itself. The events timeline is simply the way the process flows from start to finish, and this is very easy to do if you understand the process. If you need help from the process owner, an SME, or employee, you can do that too. For conditions, you add everything you know about the process, as well as any data (evidence) available from the reports or other sources. You mark significant issues (the equivalent of causal factors) for things that you know have gone wrong in the past. You can take it a step further any also mark as significant issues things that COULD go wrong (think of this as potential causal factors). You then do your root cause analysis and corrective actions. This is not hard, it is just a different way of thinking.

Just a few more thoughts about what to investigate; basically, anything that is causing you pain. Process delays, customer complaints, downtime, etc. can all be investigated. But by all means, make sure it is worth your time and that there is really something to learn from it. Please don’t investigate paper cuts!

I hope my ideas give you some food for thought. Keep pushing the boulder up the hill and improving your business. Thanks for visiting the blog.

Sign up to receive tips like these in your inbox every Tuesday. Email Barb at and ask her to subscribe you to the TapRooT® Friends & Experts eNewsletter – a great resource for refreshing your TapRooT® skills and career development.


Arc Flash Safety Talk at the 2016 Global TapRooT® Summit

Posted: December 29th, 2015 in Best Practice Presenters, Summit

Yes, I know we are not quite into the new year yet, but we have been busy planning the next summit (August 1-5 in San Antonio TX).

As the coordinator of the safety track, I am really excited about the line-up we have for speakers. I will be posting information about the track and the different sessions on the blog as the date nears.

One session I am very excited about is a talk on Arc Flash Safety by Scott King and Terry Butler from Hallam-ICS. With relatively new NFPA guidelines, this is a hot (no pun intended) topic from a compliance standpoint. More importantly, it is a major consideration from a safety standpoint, so whether your country complies with NFPA 70E or not, this is a talk you will not want to miss. The talk is scheduled for Thursday, August 4th at 1:50. We hope to see you there.

In the meantime, if you are interested in getting some of your people trained in this important topic, here is a link to an upcoming event Hallam-ICS is holding in February:

Thanks for reading the blog and we look forward to seeing you in San Antonio!


Only at a TapRooT® course!

Posted: October 29th, 2015 in Courses

I am in Iceland this week teaching the 5 day course. The class has been having a great time learning about TapRooT® and each night we take the 4 hour tour in our quest to see the Northern Lights, which we have not yet seen. Maybe tonight!

But not to worry, today during our final exercise we looked out the window of the classroom, and who do we see? David Cameron, the PM of the United Kingdom, who is making the first head of state visit from the UK to Iceland since Churchill.

So if you want some excitement in your life, you should attend a TapRooT® course!


What is the Difference Between a Safety Related Incident and a Quality Problem when using TapRooT®?

Posted: September 30th, 2015 in Quality, Root Cause Analysis Tips

Quality ControlWelcome to this week’s root cause analysis tips column.

This week I would like to ask the question…what is the difference between a safety incident and a quality problem?

Before you answer that, let me tell you that this is a trick question.

The answer is……drum roll please: there is NO DIFFERENCE. The difference in a safety problem vs. a quality problem is the consequence; there is no difference in the approach you take in investigating.

In TapRooT®, the first thing we always do is to create a SnapCharT®. And the first thing we do when creating a SnapCharT® is to define the incident with a circle. This defines the scope of your investigation. Your circle could contain anything that creates pain for your company and that you would like to prevent from happening again. Examples of things that might go in your circle:

• Fatality
• Lost time injury
• Recordable injury
• Vehicle accident
• Facility damage
• etc. etc.

• Defective product (not sent to customer)
• Defective product (sent to customer)
• Customer complaint
• Delayed shipment
• Returns
• etc. etc.

Once you have defined the incident, you map out what happened, define the causal factors, perform root cause analysis, and develop corrective actions.

So start thinking about different ways your company can use TapRooT®. I’ve mentioned Safety and Quality, but there are many more. equipment reliability, environment, security, project delays; the list is really endless.

The more ways you can use TapRooT®, the better ROI you will get from your training. I know from experience when different disciplines in an organization start speaking the same language, there are some great intangible benefits as well. So if you are a safety manager, drag your quality manager with you to training next time. You will be glad you did.

Thanks for visiting the blog and best wishes for your improvement efforts.

Would you like to receive tips like these in your inbox? Our eNewsletter is delivered every Tuesday and includes root cause tips, career development tips, current events and even a joke. Contact Barb at to sign up for the TapRooT® Friends & Experts eNewsletter.  

What’s the most important information in a root cause analysis?

Posted: July 29th, 2015 in Root Cause Analysis Tips

Welcome to this week’s root cause tips column. So what is the most important information or criteria in a good root cause analysis? (By the way, this is a trick question)

I started a list:

• A timeline of what happened
• Complete evidence
• Identification of causal factors
• Safeguards analysis (what failed)
• Safeguards Analysis (what worked)
• Root Causes substantiated by evidence
• Generic (system) Causes identified
• Corrective Actions that eliminate the root causes
• Corrective Actions that are implemented
• Corrective Actions that have been verified effective

So what do you think? Have I missed anything? Please comment below if you have any other ideas.

And which are the most important?

Yes, it is a trick question. They are ALL important.

For example, what if you did a really good job of collecting evidence and got good root causes but wrote weak corrective actions? Have you ever seen training as a corrective action for root causes that had nothing to do with training? Of course you have, that’s my point.

TapRooT® is a systematic process, software, and training for finding the real root causes of problems.

TapRooT® is a systematic process, software, and training for finding the real root causes of problems.

What if you had great corrective actions but they were never implemented (or checked to see if they were effective)?

The fact of the matter is you have to have all these things for an effective investigation and root cause analysis. It is easy to miss things, we’re all human and we all have different experiences, knowledge, and biases. But the good news is that this is all built into how TapRooT® functions. Just follow the process and you will have a good root cause analysis.

You must know WHAT happened before you can determine why. This is why evidence collection is so important.

You must know WHY before you can write corrective actions. If you do not have good evidence you will miss causal factors and root causes. ALL root causes have to be substantiated with evidence.

You must FIX the root causes. Your corrective action has to specifically address the root causes, has to be implemented, and has to be verified.

Think of it as a chain link fence. If any part of the chain is broken, the fence is compromised, and in this case, so is your investigation.

If you are interested in learning the TapRooT® Root Cause Analysis, our 2-day course offers all the process essentials needed to conduct an investigation including:

  • SnapCharT® – a simple, visual technique for collecting and organizing information to understand what happened.
  • Root Cause Tree® – a systematic, repeatable way to find the root causes of human performance and equipment problems — the Root Cause Tree® helps investigators see beyond their current knowledge.
  • Corrective Action Helper® – help lead investigators “outside the box” to develop effective corrective actions.

Check out our schedule for a course near you:

I hope I’ve given you some food for thought. Thanks for visiting our blog and happy investigating.

Safety Improvement Track at the Global TapRooT® Summit

Posted: May 7th, 2015 in Courses, Summit

There is still time to sign up for the safety improvement track at the Global TapRooT® Summit.

In addition to the blockbuster keynote speakers that every track will attend, we have a very special lineup of sessions for the safety track:

Kaizen Events using TapRooT® and the Root Cause Tree®

This session is one from the summit quality track that I added to the safety track. Why? Because in my previous life, I worked in both quality and safety departments, and there are two things I know; first, safety professionals can find great benefit in quality processes and tools, and two, most safety people have not had the benefit of being exposed to quality processes and tools. Kaizen Events are a great way to involve employees in your processes, and I know that for a safety program to be effective, employees must be involved. I am very excited about this session led by Amy Bratkovic.

Communicating Safety

Your safety message is only useful if people hear it (and understand and believe it)! UK communication’s consultants Clare Solomon and Mark Ormond are not only communication experts, they understand safety and how to specifically tailor messages to your company, environment, and culture. You will not want to miss this session.

The New Standard for OHS Management Systems – ISO 45001

As safety professionals, I know we sometimes wonder why there are ISO standards for quality, risk, environment, and a host of other things, but not safety. Well, it is finally coming. International standards expert Jim Whiting will give an overview of the soon to be released ISO 45001. Many companies require their suppliers to be certified in some of the other ISO standards mentioned, so there is no reason to believe this will not be the case with safety as well. Be on the forefront of this movement by attending this session.

Developing Proactive Performance Measures

Most people become TapRooT® users because they want to do better investigations. That’s great, but would it not be better to prevent incidents in the first place? Before you can fix a problem in your organization, you have to first have the data, and unfortunately, many companies do not collect the right proactive measures. In this session, Mark Paradies, the creator of TapRooT®, will give you plenty to think about when considering what to measure.

How to Stop Normalization of Deviance

Have workarounds and the breaking of rules become accepted, or business as usual in your company? Mark Paradies will discuss the consequences of allowing this to happen and share insight on how to avoid this condition. If you just solved this one problem (albeit a big one!) at your company, this would make the entire summit worth your time.

Stopping Human Error with Type 4 Corrective Actions

Do your correction action reports routinely involve things like training and rules? If so, that may be (I’m being nice here) the reason you have repeat incidents. If you have been to a TapRooT® course, you know that removing or reducing the hazard is the best thing you can do, but that is not always possible. But there are ways to make your people more reliable without putting a host of new rules in place. In this session, human factors expert Dr. Joel Haight will share ideas on how you can strengthen your corrective actions to prevent recurrence.

Process Safety; Comparing Seveso 3 to OSHA PSM

Different standards and regulations have different benefits and best practices included in them. Can we learn from other standards and regulations even if we are not forced to comply with them? Join Belgium Regulator Frank Verschueren as he discusses how these two process safety regulations compare.

So that’s it. Several great sessions. Have I mentioned the keynote sessions? Well, I am going to mention them again. We have everything – someone who worked for the President of the United States, a former NBA player and radio personality, a Professor who has been voted the best speaker at the summit, two gents who investigated serious North Sea Oil and Gas incidents, and last but not least, Captain Phillips.

Wow. And of course there is the party at Jimmy Buffet’s Margaritaville with entertainment from Carl Dixon of The Guess Who and April Wine fame.

You can’t afford to miss this event. Register HERE and select the Safety Improvement Track. See you there!

2 Day TapRooT® Incident Investigation and Root Cause Analysis Course in Corpus Christi

Posted: April 27th, 2015 in Courses

Nancy Hitchins and I are teaching the 2 day course today deep in the heart of Texas. Here are some pictures of students working on an exercise and Nancy teaching:







Why not join us for us for the next course? You can see the schedule and enroll HERE

5 Day TapRooT® Advanced Root Cause Analysis Team Leader Training in Houston

Posted: April 13th, 2015 in Courses

Nancy Hitchins and I are teaching the 5 day course this week in Houston. Here are some pictures of the day one morning activities:






Why not join us for the next course? You can see the schedule and enroll HERE

Final exercise pictures from 5 Day TapRooT® Advanced Root Cause Analysis Team Leader training in Doha

Posted: March 19th, 2015 in Courses

All of our TapRooT® courses conclude with each investigation team presenting their results from the investigation they brought with them to the management team (the rest of the class). Here are some pictures of the final presentations from today’s ending of the 5 day course in Doha, Qatar:











I hope you will consider joining us for the next course. Our courses in the Middle East always fill several weeks in advance, so do not delay. The next course commences in Dubai on June 7; you can register for the class HERE

5 Day TapRooT® Advanced Root Cause Analysis Team Leader training in Doha, Qatar

Posted: March 16th, 2015 in Courses

I am in Doha this week teaching the 5 day course. Here are some pictures of the students working on the day one SnapCharT® exercise and the day two 14 Step Cognitive interview exercise:










This course did fill several weeks in advance, and we had several people on the waiting list who were not able to attend. We have heavy demand and our courses in the Middle East do fill very quickly, so if you want to join the next course, you should enroll as soon as possible. The next course is the 5 day course in Dubai on June 7.

To view more photos from this course, click HERE.

To see the information and enroll in the course, click HERE

2 Day TapRooT® Incident Investigation and Root Cause Analysis course in Dubai

Posted: March 12th, 2015 in Courses

Today marks the end of yet another successful TapRooT® course in Dubai. Here are some pictures of the students doing their final presentations:





This course did fill, so I’m sorry if we could not accommodate you. Out next course in Dubai (5 day course) will be in June. To see the information and register, click HERE

5 day TapRooT® Advanced Root Cause Analysis Team Leader training in Calgary

Posted: February 24th, 2015 in Courses

Amber Bickerton and I are teaching the 5 day course this week in Calgary. Here are some pictures of the students working on their investigation interviewing exercise:






Why not join us for the next course? You can see our schedule and register HERE

Onsite TapRooT® courses

Posted: January 20th, 2015 in Courses

Thanks to TapRooT® instructor Ralph Blessing for sending this picture of an onsite course being held today for one of my clients in Illinois. In the picture, instructor Ralph Brickey is teaching the students how to find Causal Factors.


By the way, not all of our instructors are named Ralph, but they are all excellent instructors! We can teach any of our courses at your site (10 or more people), and we have instructors throughout the world. If you are interested in holding a course at your site, just e-mail us at

Another successful TapRooT® course in Dubai!

Posted: December 11th, 2014 in Courses, Uncategorized

Today marks the end of yet another great course in Dubai. Here are some pictures of the students and the final team exercise presentations:







Our next set of courses in the Middle East will be in March; a 2 day in Dubai or a 5 day in Doha. To join one of these courses, register HERE

5 Day TapRooT® Root Cause Analysis Team Leader Training in Dubai

Posted: December 7th, 2014 in Courses

I am in Dubai this week teaching the five day course. Here are some pictures of the students on day one working on their first exercise, building a SnapCharT®:






VIEW MORE PHOTOS from Dubai (Click here to view more.)

This course did fill, so I’m very sorry if we were not able to accommodate you this time. Our next courses in the region will be in March; the 2 day course in Dubai and 5 day course in Doha. To see the schedule and register, click HERE

5 Day TapRooT® Advanced Root Cause Analysis Team Leader course in Vancouver, BC

Posted: November 3rd, 2014 in Courses

I am in Vancouver this week teaching the 5 day course. Here are some pictures of students working on day one exercises:






Why not join us for a future course? You can see the schedule and register HERE

5 Day TapRooT® Root Cause Analysis Course in Portland, OR

Posted: October 20th, 2014 in Courses

Kevin McManus and I are teaching the 5 day course in Portland this week. Here are some pictures from day one:






Why not join us for a future course? You can view the schedule and register HERE

Root Cause Analysis Video Tips – Doing Better Investigations (Part 1)

Posted: August 20th, 2014 in RCA Tip Videos, Root Cause Analysis Tips, Video, Video Depot

Hello and welcome to this week’s root cause analysis tip. This week the topic is doing better investigations.

The most important thing you can do for better investigations is to use TapRooT®! But assuming you already do that, here are some more tips that I hope will help.

The first thing to think about is preparation – does your company have an investigation policy and does everyone know their roles and responsibilities? In other words, do you have a plan? The time to develop your plan is not after you have had a major incident! You can refer to Appendix A of the TapRooT® book for a sample plan; however, I would imagine most of you already have a plan at your company, so your preparation is simple – read the plan and understand it.

Think about Notification – Who, and under what circumstances? Let senior management know someone’s working on the investigation.  You can share the preliminary information as well. Set expectation that it may take some time. They’ll often back off and let you do your job if you tell them these things.

Plan your investigation – what kind of photos, documents, equipment reliability data do you need? Plan what data to collect and how you’re going to collect that data.

So now you are ready to start your investigation. The best thing you can do to have a good investigation is to have a really good SnapCharT®. Most of the time you spend in an investigation is spent collecting evidence and putting it on your chart. Interviewing is an important part of evidence collection. Follow our 14-Step interview process, it’s in the book. The best way to interview is to let the person tell their story, they may answer your questions without you even needing to ask. If you only ask questions, you’ll only get the answers to your questions and nothing else.

View Part 2 of Dave’s tip on Performing Better Investigations!

or check out other short videos in our root cause tip series:

What Makes a World-Class Root Cause Analysis System with Ken Reed (Click here to view tip.)

TapRooT® & Healthcare: Getting the Most from Your Sentinel Event Investigation with Ed Skompski (Click here to view tip.)

5 Day TapRooT® Advanced Team Leader Training Course in Niagara Falls, Canada

Posted: July 14th, 2014 in Courses

Steve Swarthout and I are teaching the 5 day course this week in Niagara Falls. Here are some pictures of Steve teaching and students working on their first exercise:







Why not join us for a future course? You can see the schedule and register HERE

Root Cause Analysis Tips – Building a Better SnapCharT®

Posted: June 25th, 2014 in Root Cause Analysis Tips

Welcome to this week’s root cause tips. This week I would like to talk about the SnapCharT®


As you know, the SnapCharT® is the tool I use to plan my investigation, document my evidence, and present the incident to management. It’s a powerful yet easy tool to help in each of these areas.

First, let’s talk form. One of the common problems I see when people first start developing a SnapCharT® is trying to get too much information in a small space. I normally start the first page with no more than 4-5 events across the top of the page. As you continue to develop your timeline, you will soon know if you need to more pages, but the software also knows and will create the page for you. It is much easier to add your evidence if you leave plenty of room to work. If you try to put 10 events at the top of your page you will soon run out of space for your evidence. Your chart will be cluttered, hard to digest, and impossible to present with. I want to see a lot of evidence, but I want it to be organized and look good. This will make it much easier to read and understand it as I use the information later for my root cause analysis.

I’ve already said there should be a lot of evidence on the chart. Everything you know about the incident should be there. If you have been to a TapRooT® course before, you know that we always do a final exercise, and as part of the exercise the instructor will approve your causal factors. When I do this, sometimes the discussion begins with a student saying “let me tell you what happened” at which point I say STOP! – I should be table to tell what happened by reading your SnapCharT®! As I review it and start to ask questions, answers pour out of the team, but some of that information is not on the chart. Make sure everything is there. That way you will not forget anything when you do your analysis, and you will get fewer questions when presenting. And, make sure everything on the chart is factual.

Next, wording matters. Don’t be vague, be very specific. Don’t say it was hot; say it was 90 degrees. Use job titles or functions instead of names to reduce blame. Be very clear with your wording so someone who knows nothing about the incident can tell from your wording exactly what you mean. Get good at using the words ‘”did not” to describe things that were supposed to happen but did not; this will make causal factor identification much easier later in the process.

I try to assemble all my evidence directly below the event in a straight line so it is very easy to read and is arranged into nice groups of information. It is permissible to have two rows of information if it makes sense to do that, but I find that this is not always needed. When it is, make sure each row of information goes together in a logical group; for example, you might have a group with all the training information and another group with all the policy information. If you have been to a 5 day TapRooT® course, you might remember when we talk about procedures we say “the burden of written communication is on the writer, not the reader.” SnapCharT®s are no different!

Optionally, you might elect to put safeguards on your chart. Resist the temptation to only put failed safeguards. In fact, showing safeguards that worked on your chart for your management presentations is a great way of showing two things; what is working in the business, and that the incident could have been worse.

If you have been to a TapRooT® course, you have heard this before, but it is worth repeating – draw your lines last! If you draw your lines too early and you end up having to move things around, you will end up having to delete them. Don’t work any harder than you need to.

The last thing I want to address is the use of colors. It is fine to use colors if you want, but be careful and use light colors. If you use a dark color, it may look fine on your computer, but when you go to present people may not to be able to read it on the screen. I have seen people show causal factors in a different color in their presentations, and that is a great way to bring that information out. I say that you cannot go wrong with black and white. Then again, I am obsessed with simplicity, and I know not everyone is wired that way. Do what makes sense for you.

So that’s it for this week. I hope some of this information is helpful. Thanks for readying the blog, and happy investigating.

5 Day TapRooT® Advanced Root Cause Analysis Team Leader Training in Munich, Germany

Posted: June 16th, 2014 in Courses

Derek Rutherford and I are teaching the 5 day course this week in Munich. We are off to a great start on day one, here are some pictures from this morning:






We hold courses all over the world, so why not join us for a future course? You can view the schedule and register HERE

5 Day TapRooT® Advanced Root Cause Analysis Team Leader course in Gatlinburg, TN

Posted: June 9th, 2014 in Courses

Dan Verlinde and I are teaching the 5 day course this week in Gatlinburg. Here are some pictures of the students working on day one root cause exercises:







Why not plan to join us for the next course? You can see the schedule and register HERE

Connect with Us

Filter News

Search News


Angie ComerAngie Comer


Anne RobertsAnne Roberts


Barb CarrBarb Carr

Editorial Director

Chris ValleeChris Vallee

Human Factors

Dan VerlindeDan Verlinde

VP, Software

Dave JanneyDave Janney

Safety & Quality

Garrett BoydGarrett Boyd

Technical Support

Ken ReedKen Reed

VP, Equifactor®

Linda UngerLinda Unger


Mark ParadiesMark Paradies

Creator of TapRooT®

Michelle WishounMichelle Wishoun

Licensing Paralegal

Per OhstromPer Ohstrom

VP, Sales

Shaun BakerShaun Baker

Technical Support

Steve RaycraftSteve Raycraft

Technical Support

Wayne BrownWayne Brown

Technical Support

Success Stories

We started using TapRooT® in the mid 1990s after one of our supervisors wanted to instill a more formal process to our investigations…


Our Acrylates Area Oxidation Reactor was experiencing frequent unplanned shutdowns (trips) that…

Rohm & Haas
Contact Us