Category: Current Events

Monday Accident & Lessons Learned: Human Error That Should Not Occur

July 25th, 2016 by

This Accident shares a “Call Back” Report from the Aviation Safety Reporting System that is applicable far beyond aviation.

In this case, the pilot was fatigued and just wanted to “get home.” He had a “finish the mission” focus that could have cost him his life. Here’s an excerpt:

I saw nothing of the runway environment…. I had made no mental accommodation to do a missed approach as I just knew that my skills would allow me to land as they had so many times in past years. The only conscious control input that I can recall is leveling at the MDA [Rather than continuing to the DA? –Ed.] while continuing to focus outside the cockpit for the runway environment. It just had to be there! I do not consciously remember looking at the flight instruments as I began…an uncontrolled, unconscious 90-degree turn to the left, still looking for the runway environment.

To read about this near-miss and the lessons learned, see:

http://asrs.arc.nasa.gov/docs/cb/cb_436.pdf

Screen Shot 2016 06 28 at 3 35 26 PM

Monday Accident & Lessons Learned: Freight Train Derailment in the UK – Three New Recommendations

July 18th, 2016 by

Screen Shot 2016 06 01 at 5 03 36 PM

Derailment of freight train near Angerstein Junction, south east London, 3 June 2015

At about 12:10 hrs on 3 June 2015, one wagon of an empty freight train derailed on the approach to Angerstein Junction, near Charlton in south east London. The train continued over the junction, derailing two further wagons, before it stopped on the Blackheath to Charlton line. The three derailed wagons were partly obstructing the line used by trains travelling in the opposite direction. No other trains were involved in the accident and no-one was injured, but there was significant damage to the railway infrastructure.

The wagons derailed because the leading right-hand wheel on one of them was carrying insufficient load to prevent the wheel climbing up the outer rail on a curved section of track. The insufficient load was due to a combination of the suspension on that wheel being locked in one position, a twisted bogie frame and an intended twist in the track.

As a consequence of this investigation, RAIB has made three recommendations.

The first, addressed to VTG (the wagon owner), seeks improvements to its wagon maintenance processes.

The second, also addressed to VTG, seeks liaison with industry to improve understanding of how wagon suspension wear characteristics relate to maintenance processes.

The third, addressed to Network Rail, seeks a review of infrastructure arrangements at the accident location.

The report also includes a learning point reinforcing a previous recommendation intended to encourage use of currently available wheel load data to enable identification of wagons with defects or uneven loads that are running on Network Rail’s infrastructure.

To see the complete report, go to:

https://assets.digital.cabinet-office.gov.uk/media/5748532b40f0b60366000016/R102016_160601_Angerstein_Junction.pdf

The above information and report are from the UK Rail Accident Investigation Branck. See their web site at:

https://www.gov.uk/government/organisations/rail-accident-investigation-branch

Great People Coming to the 2016 Global TapRooT® Summit

June 29th, 2016 by

I just went through the attendance list for the 2016 Global TapRooT® Summit and I was impressed. What a great bunch of people we are having come together in San Antonio!

GeneralSession04

For me, as President of System Improvements and one of the creators of the TapRooT® Root Cause Analysis System, the Summit always seems like old home week or a high school reunion. I get to see some of our clients that have been working hard to save lives, improve quality, and keep their companies from getting a black eye.

We’ve been doing these Summits since 1994 and you might not believe it but, I’ve been learning new and valuable stuff at the Summit every year. 

So for all of you coming to the 2016 Global Summit,

I CAN’T WAIT TO SAY “HOWDY!”

And get caught up on what you have been doing to make the world a better place.

And for those who haven’t signed up yet,

GET HOT!

The Summit is just about a month away (August 1-5). You need to get approval, get registered, and get your travel scheduled.

What? You don’t know why you should attend? You need the knowledge shared at the Summit to …

SAVE LIVES

SAVE YOUR COMPANY $$$

IMPROVE QUALITY

OPTIMIZE ASSETS

Those are business critical topics that you need to make your company best in class.

See the Summit brochure at:

 http://www.taproot.com/taproot-summit

See the Summit agenda at:

http://www.taproot.com/taproot-summit/summit-schedule

If you need more convincing, let me plead with you to attend. Watch this video…

Mark Paradies invites you to the 2016 Global TapRooT® Summit from TapRooT® Root Cause Analysis on Vimeo.

Is “Ordering” Improvements Enough?

June 27th, 2016 by

Screen Shot 2016 06 27 at 5 19 13 PM

Can command and control improve safety?

According to this ABC article,  Chinese government has “ordered” improvements in safety. Yet 11 people died in an accident at an Aluminum Corp. of China aluminum plant when equipment they were dismantling fell on them. The article also mentions the chemical explosion that killed 173 people in the port city of Tianjin last year.

What are you doing to improve safety?

Can you or your management “order” improvements?

Perhaps you need to learn root cause analysis and best practices and skills to make your safety program world class?

If you want next year to be better than this year, sign up for the 2016 Global TapRooT® Summit in San Antonio, Texas, on August 1-5.

Pick the advanced course that will help you learn the skills you need to to improve your company’s performance.

Then pick the best practice sharing sessions at the Summit that will help you meet the biggest challenges that face your company.

Learn from your peers from around the world (see the LIST here).

Learn from people in your industry and other industries (see the LIST here).

And don’t forget our Summit GUARANTEE:

Attend the Summit and go back to work and use what you’ve learned. If you don’t get at least 10 times the return on your investment, simply return the Summit materials and we’ll refund the entire Summit fee.

With a guarantee like this one, you have nothing to lose and everything to gain!

Monday Accident & Lessons Learned: Derailment at Godmersham, Kent, UK

June 27th, 2016 by

 

 

Screen Shot 2016 04 16 at 4 54 57 PM

 

Here’s a summary of the report from the UK Rail Accident Investigation Branch about a derailment at Godmersham, UK:

 

“At around 21:40 hrs on 26 July 2015, a passenger train derailed after striking eight cows that had gained access to the railway at Godmersham in Kent, between Wye and Chilham stations. There had been a report of a cow on the railway an hour earlier, but a subsequent examination by the driver of the next passing train did not find anything. There were no further reports from other trains that passed before the accident occurred.

 

The train involved in the accident was travelling at 69 mph (111 km/h) at the point of impact. There were 67 passengers on board plus three members of staff; no injuries were reported at the time of the accident. Because the train’s radio had ceased to work during the accident, the driver ran for about three-quarters of a mile towards an oncoming train, which had already been stopped by the signaller, and used its radio to report the accident.

 

The accident occurred because the fence had not been maintained so as to restrain cows from breaching it, and because the railway’s response to the earlier report of a cow on the railway side of the fence was insufficient to prevent the accident. In addition, the absence of an obstacle deflector on the leading unit of the train made the derailment more likely.

 

As a result of this accident, RAIB has made five recommendations addressing the fence inspection process, clarification of railway rules in response to reports of large animals within the boundary fence, the fitting of obstacle deflectors to rolling stock (two recommendations), and the reliability of the train radio equipment.

 

RAIB has also identified two learning points for the railway industry, relating to the railway’s response to emergency situations, including the response to reports of large animals within the boundary fence and the actions to take following an accident.

Here is a link to read the report…

R052016_160406_Godmersham

Monday Accident & Lessons Learned: Collision between a tram and a pedestrian, Manchester

June 20th, 2016 by

Screen Shot 2016 04 12 at 12 51 33 PM

The UK Rail Accident Investigation Branch published a report about a tram hitting a pedestrian in Manchester, UK.

A summary of the report says:

At about 11:13 hrs on Tuesday 12 May 2015, a tram collided with and seriously injured a pedestrian, shortly after leaving Market Street tram stop in central Manchester. The pedestrian had just alighted from the tram and was walking along the track towards Piccadilly.

The accident occurred because the pedestrian did not move out of the path of the tram and because the driver did not apply the tram’s brakes in time to avoid striking the pedestrian.

As a result of this accident, RAIB has made three recommendations. One is made to Metrolink RATP Dev Ltd in conjunction with Transport for Greater Manchester, to review the assessment of risk from tram operations throughout the pedestrianised area in the vicinity of Piccadilly Gardens.

A second is made to UK Tram, to make explicit provision for the assessment of risk, in areas where trams and pedestrians/cyclists share the same space, in its guidance for the design and operation of urban tramways.

A further recommendation is made to Metrolink RATP Dev Ltd, to improve its care of staff involved in an accident.

For the complete report, see:

https://assets.digital.cabinet-office.gov.uk/media/5705107640f0b6038500004d/R062016_160412_Market_Street.pdf

 

What does a bad day look like?

June 7th, 2016 by

For one mom, it looked like her vacation cruise ship pulling away from the dock without her but with her children on it.

Lesson learned:  Don’t miss the boat.


Read story.

Root Cause Analysis on Trends

June 2nd, 2016 by

Welcome to this week’s root cause analysis tips. This week I would like to talk about root cause analysis on trends.

One of the most common discussions I have with people involves what to do with the things you do not have time to investigate. Many companies use some sort of ranking or risk matrix to determine at what point something is important enough to warrant an investigation. I have some thoughts on this…

checklist-1266989_1280

Sometimes people try to investigate everything and end up doing poor investigations.

First of all, sometimes people try to investigate everything and end up doing poor investigations on everything; that does not help anybody. One consideration on where to draw the line is related to your current numbers. For example, if you work in a plant that has a few incidents per year, if you have the resources to investigate, I say do it. But if you are looking at large numbers at a corporate level, you may not have the resources – and you have to decide where to draw the line.

So what about the minor incidents you have that don’t get investigated – what to do with them? Well, it goes beyond minor incidents, you have other things that can be trended, rootcaused (is that a word?), and corrected. It is actually quite easy to investigate a trend, the hard part is actually collecting the data. I call this getting things in the “right bucket.” Here are some examples of information you might collect (or should):

• Minor incidents
• Near Misses
• Audit Findings
• BBS Observations

If you do a good job of collecting data, you can then trend the information. Your trends should reveal what processes are causing you pain. You then investigate the PROCESS, rather than an incident. For example, let’s say you had some near misses, some audit findings, and some BBS observations related to your lockout/tagout process that revealed issues. You may have not had a major incident yet, but you have warning signs. You can’t (or don’t have time to) go back and do full blown investigations on each data point, so you map out the process with a SnapCharT®, adding everything you know about the process as conditions, and based on that information, you identify your known failures and potential failures as Significant Issues (the equivalent to Causal Factors) in TapRooT®. Then off to the Root Cause Tree® and corrective actions. You’ve done ONE investigation on potentially dozens (or hundreds) of issues. This is more effective and much easier than doing multiple bad investigations.

Investigation of trends is a very important consideration in Audit Programs. Again, do you have time to investigate every finding? Maybe not. Here is an example:

A corporate auditor for a big box store has 100 compliance questions on a checklist and 100 locations that were audited using this checklist in the past year. That is a fair amount of data. The auditor can use this data to develop a list of top findings and then analyze the biggest issues.

The data for the yearly compliance is presented on a Pareto Chart below.

Screen Shot 2016-05-10 at 4.02.03 PM

The top two categories are related to a similar topic: required signage. The audits have revealed both missing signs and outdated signs. Let’s look at these issues together on a SnapCharT®. Significant Issues are marked with a triangle:

Screen Shot 2016-05-10 at 4.02.24 PM

Next, you take the Significant Issues through the Root Cause Tree®, and apply corrective actions. One investigation on dozens of findings.

I hate to use clichés, but WORK SMARTER NOT HARDER!

If you already collect good information and have good trending in place, consider attending the new TapRooT® for Audits Course on May 4-5.

Thanks for taking the time to read the blog, and happy auditing.

Monday Accident & Lessons Learned: The Cost of an Accident – BP Pays Out $56 Billion So Far

May 23rd, 2016 by

The Wall Street Journal announced that BP incurred $56 Billion in expenses from the Deepwater Horizon explosion and spill. And the end is still not in sight.

BP’s CFO said “It’s impossible to come up with an estimate [of future costs].”

Of course, those costs don’t include the lives lost and the negative PR that the company has received. 

How much is a best in class process safety program worth? As BP’s CFO says …

It’s impossible to come up with an estimate.

If you would like to learn best practices to improve your safety performance and make your programs “best in class,” the at ten the 2016 Global TapRooT® Summit in San Antonio, Texas, on August 1-5.

What? You say YOUR COMPANY CAN’T AFFORT IT? Can it afford $56 Billion? The investment in your safety program is a pittance compared with the costs of a major accident. Your company should put spending on safety improvement BEFORE other investments … especially in difficult times.

If you are a senior manager, don’t wait for your safety folks to ask to attend the Summit. Send them an e-mail. Tell them you are putting a team together to attend the Summit with you to learn best practices to prevent major accidents. Ask them who would be the best people to include on this team. Then get them all registered fot the Summit.

Remember, the Summit is GUARANTEED

GUARANTEE

Attend the Summit and go back to work and use what you’ve learned.
If you don’t get at least 10 times the return on your investment,
simply return the Summit materials and we’ll refund the entire Summit fee.

Wow! A guaranteed ROI. How can we be so sure that you will return to work with valuable ideas to implement? Because we’ve been hosting these Summits for over 20 years and we know the “best of the best” attend the Summit and we know the value of the ideas they share each year. We’ve heard about the improvements that Summit attendees have implemented. Being proactive is the key to avoiding $56 Billion dollar mistakes.

So don’t wait. Get your folks registered today at:

http://www.taproot.com/taproot-summit/register-for-summit

Will public shaming lead to better safety?

May 12th, 2016 by

This is old news to most (or should be) but OSHA finally published the long awaited rule on injury reporting:

https://www.osha.gov/recordkeeping/finalrule/index.html

So now that information will become more public will companies improve their records to stay out of view? Some things to think about:

*If they did not care about worker’s safety before, why would they care now?
*Will anyone even pay attention?
*Will management put more pressure on the operation to reduce rates?
*Will management give the operation additional resources to accomplish it?
*Will the media misuse the information? Will it be used politically?
*Did you just become your PR Department’s best bud or worst enemy?
*Will it actually help companies choose better business partners? (many companies have been requiring rates during the RFP process anyway)
*Is everyone else in the organization now throwing in their 2 cents on how you run your business?

I look at this a few ways:

*If you already have a good program and record, this should be of little concern to you from the public information standpoint.
*Assuming that is the case, as a former corporate safety manager, I see this as a HUGE cost for companies to comply. But there has been (and still is) plenty of time to get things in place.

At the end of the day, you cannot control regulations. But can you control your injuries? You bet.

Two of the best ways to lower your injury rates? Do better investigations and audits. Why not join us for a future course? You can see the schedule and enroll HERE

ATF Says West Fertilizer Explosion Was a Criminal Act

May 11th, 2016 by

The explosion at the West Fertilizer Plant was thought to have been a tragic accident. However, the Associated Press has reported that the Alcohol, Tobacco, and Firearms, and Explosives Agency (ATF) has said that the fire that caused the explosion was “intentionally set.”

Here is a TV report link:

http://livestream.com/KXXV/live

Monday Accident & Lessons Learned: Will Criminal Charges Make Actors Safer?

May 9th, 2016 by

Screen Shot 2016 04 27 at 1 35 48 PM

Harrison Ford was hit by a heavy, hydraulically operated door while filming the new Star Wars movie. He suffered a broken leg. The UK Health & Safety Executive charged Foodles Productions (UK) Ltd. with four criminal violations and the company will have it’s first court hearing on May 12th.

Now the question – or lesson learned …

  • Will criminal charges make movie actors safer? 
  • Do studios already have incentives to keep their actors safe?

What do you think? Leave your comments here…

Another Fort McMurray Video

May 8th, 2016 by

This video has a few four letter words so turn your sound off if you would be offended … but the footage is spectacular.

Root Cause Analysis Tip: Save Time and Effort

May 4th, 2016 by

The Nuclear Energy Institute published a white paper titled:

Reduce Cumulative Impact From the Corrective Action Program

To summarize what is said, the nuclear industry went overboard putting everything including the kitchen sink into their Corrective Action Program, made things too complex, and tried to fix things that should never have been investigated. 

How far overboard did they go? Well, in some cases if you were late to training, a condition report was filed.

For many years we’ve been preaching to our nuclear industry clients to TARGET root cause analysis to actual incidents that could cause real safety or process safety consequences worth stopping. We actually recommend expanding the number of real root cause analyses performed while simplifying the way that root cause analyses were conducted.

Also, we recommended STOPPING wasting time performing worthless apparent cause analyses and generating time wasting corrective actions for problems that really didn’t deserve a fix. They should just be categorized and trended (see out Trending Course if you need to learn more about real trending).

We also wrote a whole new book to help simplify the root cause analysis of low-to-medium risk incidents. It is titled:

Using the Essential TapRooT® Techniquesto Investigate Low-to-Medium Risk Incidents

NewImage

 Just published this year, this book is now the basis for our 2-Day TapRooT® Root Cause Analysis Course and starting on Thursday will be the standard book in our public 2-Day TapRooT® Courses.

Those who have read the book say that it makes TapRooT® MUCH EASIER for simple investigations. It keeps the advantages of the complete TapRooT® System without the complexity needed for major investigations. 

What’s in the new book? Here’s the Table of Contents:
  

Chapter 1: When is a Basic Investigation Good Enough?

Chapter 2: How to Investigate a Fairly Simple Problem Using the Basic Tools of the TapRooT® Root Cause Analysis System

  • Find Out What Happened & Draw a SnapCharT®
  • Decision: Stop or More to Learn?
  • Find Causal Factors Using Safeguard Analysis
  • Find Root Causes Using the Root Cause Tree® Diagram
  • Develop Fixes Using the Corrective Action Helper Module
  • Optional Step: Find and Fix Generic Causes
  • What is Left Out of a Basic Investigation to Make it Easy?

Chapter 3: Comparing the Results of a 5-Why Investigation to a Basic TapRooT® Investigation

Appendix A: Quick Reference: How to Perform a Basic TapRooT® Investigation

The TapRooT® Process for simple incidents is just 5 steps and is covered in 50 pages in the book.

If you are looking for a robust techniques that is usable on your simple incidents and for major investigations, LOOK NO FURTHER. The TapRooT® System is the answer.

If you are in the nuclear industry, use TapRooT® to simplify the investigations of low-to-moderate risk incidents.

If you are in some other industry, TapRooT® will help you achieve great results investigating both minor incidents and major accidents with techniques that will help you no matter what level of complexity your investigation requires.

One more question that you might have for us ,,,

How does TapRooT® stay one (or more) steps ahead of the industry?

 That’s easy.

 

  • We work across almost every industry in every continent around the world. 
  • We spend time thinking about all the problems (opportunities for improvement) that we see. 
  • We work with some really smart TapRooT® Users around the world that are part of our TapRooT® Advisory Board. 
  • We organize and attend the annual Global TapRooT® Summit and collect best practices from around the world.

 We then put all this knowledge to work to find ways to keep TapRooT® and our clients at the leading edge of root cause analysis and performance improvement excellence. We work hard, think hard, and each year keep making the TapRooT® Root Cause Analysis System better and easier to use.

If you want to reduce the cumulative impact of your corrective action program, get the latest TapRooT® Book and attend our new 2-Day TapRooT® Root Cause Analysis Course. You will be glad to get great results while saving time and effort.

 

 

 

Medical Errors – 3rd Leading Cause of Death in the US

May 4th, 2016 by

Medical Death Chart

Wow. Quite an eye-opening Washington Post article describing a report published in the BMJ. A comprehensive study by researchers at the John Hopkins University have found that medical mistakes are now responsible for more deaths in the US each year than Accidents, Respiratory Disease, and Strokes. They estimate over a quarter million people die each year in the US due to mistakes made during medical procedures. And this does NOT include other sentinel events that do not result in death.  Researchers include in this category “everything from bad doctors to more systemic issues such as communication breakdowns when patients are handed off from one department to another.”  Other tidbits from this study:

  • Over 700 deaths each day are due to medical errors
  • This is nearly 10% of all deaths in the US each year

What’s particularly alarming is that a study conducted in 1999 showed similar results.  That study called medical errors “an epidemic.”  And yet, very little has changed since that report was issued.  While a few categories have gotten better (hospital-acquired infections, for example), there has been almost no change in the overall numbers.

I’m sure there are many “causes” for these issues.  This report focused on the reporting systems in the US (and many other countries) that make it almost impossible to identify medical error cases.  And many other problems are endemic to the entire medical system:

  • Insurance liabilities
  • Inadequate reporting requirements
  • Poor training at many levels
  • Ineffective accountability systems
  • between patient care and running a business

However, individual health care facilities have the most control over their own outcomes.  They truly believe in providing the very best medical care to their patients.  They don’t necessarily need to wait for national regulations to force change.  They often just need a way to recognize the issues, minimize the local blame culture, identify problems, recognize systemic issues at their facilities, and apply effective corrective actions to those issues.

I have found that one of the major hurdles to correcting these issues is a lack of proper sentinel event analysis.  Hospitals are staffed with extremely smart people, but they just don’t have the training or expertise to perform comprehensive root cause analysis and incident investigation.  Many feel that, because they have smart people, they can perform these analyses without further training.  Unfortunately, incident investigation is a skill, just like other skills learned by doctors, nurses, and patient quality staff, and this skill requires specialized training and methodology.  When a facility is presented with this training (yes, I’m talking about TapRooT®!), I’ve found that they embrace the training and perform excellent investigations.  Hospital staff just need this bit of training to move to the next level of finding scientifically-derived root causes and applying effective corrective actions, all without playing the blame game.  It is gratifying to see doctors and nurses working together to correct these issues on their own, without needing some expensive guru to come in and do it for them.

Hospitals have the means to start fixing these issues.  I’m hoping the smart people at these facilities take this to heart and begin putting processes in place to make a positive difference in their patient outcomes.

 

Monday Accident & Lessons Learned: “We are going to find out who is to blame for this …”

May 2nd, 2016 by

“We are going to find out who is to blame because that is the frustrating part about health and safety accidents such as this. When we go back, when we read the report, we find out each and every time that it was preventable. That’s why we need to learn from this,” Kevin Flynn, Ontario’s labour minister, told reporters Tuesday afternoon. 

That’s a quote from CP 24, Toronto’s Breaking News. See the story and watch the video interview about the accident here:

http://www.cp24.com/news/we-need-to-learn-from-this-labour-minister-says-after-building-scaffolding-collapse-1.2864799

Is there a lesson to be learned here?

Interestingly, the “contractor” performing the work in this accident was a branch of the Ontario government.

Confidential Medical Records Leak Sinks $4.6 Million Company

April 27th, 2016 by

medical-781422_1280

What are the lessons learned from this incident?

Everything was going great for Michael Daughtery, owner of LabMD, a company that tested blood, urine, and tissue samples for urologists. He was living the dream. That is, until one of his managers who had been using LimeWire file-sharing to download music inadvertently shared patient medical records with it. It was a violation of company policy to have it on her computer.

The story goes from bad to worse. Read “A leak wonded this company. Fighting the Feds finished it off” on Bloomberg.

In one day, your whole life could change.  Wouldn’t it be great if you never got that phone call that disaster has struck your company?

We have several exclusive Pre-Summit Courses coming up in August that can help you keep your company from facing a crisis such as this.  TapRooT® for Audits, Understanding and Stopping Human Error, Risk Assessment & Management and more.

View them here.

We also offer a Medical track immediately following the special 2-day courses at the 3-day Global TapRooT® Summit.  Learn more here.

We hope to meet you in San Antonio, Texas during Global TapRooT® Summit week to help you solve your business-critical issues.

Monday Accident & Lessons Learned: Human Error + Equipment Failure = 911 System Outage

April 25th, 2016 by

NewImage

The following sequence is from the Clarence Bee

First, an air conditioning unit for a power supply room failed.

No big deal … There’s an automatic backup and a system to notify the engineer.

Oops … It failed too.

Well, at least there is a local temperature alarm. The local maintenance guy will do the right thing … Right?

Sorry. In the “heat” of the moment, he pushed the “kill” button.

Unfortunately, this was for fire emergencies and it cut off all the power to the 911 system. And nobody knew how to reset it. 

Finally, the tech rep from Reliance Electric arrived and the system was restored – 3.5 hours after the kill switch was pushed.

What can you learn from this incident?

  • Do your people know what to do when things go wrong? 
  • Do you do drills? 
  • Are things clearly labeled? 
  • Are there response procedures? 
  • How long has it been since people were trained?

Monday Accident & Lessons Learned: CSB Issues Report on BP Deepwater Horizon Accident

April 18th, 2016 by

Screen Shot 2016 04 15 at 3 07 59 PM

The CSB press release starts with:

“Washington, DC, April 13, 2016 – Offshore regulatory changes made thus far do not do enough to place the onus on industry to reduce risk, nor do they sufficiently empower the regulator to proactively oversee industry’s efforts to prevent another disaster like the Deepwater Horizon rig explosion and oil spill at the Macondo well in the Gulf of Mexico, an independent investigation by the U.S. Chemical Safety Board (CSB) warns.”

For the whole report, see:

http://www.csb.gov/the-us-chemical-safety-boards-investigation-into-the-macondo-disaster-finds-offshore-risk-management-and-regulatory-oversight-still-inadequate-in-gulf-of-mexico/

 

 

Monday Accident & Lessons Learned: CEO gets 1 year in prison for fatal accident

April 11th, 2016 by

Screen Shot 2016 04 11 at 11 14 53 AM

Press reports that the ex-CEO of Massey Coal faces a year in prison as a result of Upper Big Branch Mine explosion. As a CEO, putting the safety of your workers at risk to improve profits can be costly.

Monday Accident & Lessons Learned: RAIB Report – Serious accident at Clapham South tube station

April 4th, 2016 by

The following is the summary of a report from the UK Rail Accident Investigation Branch.

Screen Shot 2016 03 09 at 10 35 46 AM

Serious accident involving a passenger trapped in train doors and
dragged at Clapham South station, 12 March 2015

At around 08:00 hrs on Thursday 12 March 2015, a passenger fell beneath a train after being dragged along the northbound platform of Clapham South station, in south London. She was dragged because her coat had become trapped between the closing doors of a London Underground Northern line train.

The train had stopped and passengers had alighted and boarded normally, before the driver confirmed that the door closure sequence could begin. The train operator, in the driving cab, started the door closure sequence but, before the doors had fully closed, one set encountered an obstruction and the doors were reopened. A passenger who had just boarded, and found that the available standing space was uncomfortable, stepped back off the train and onto the platform, in order to catch the following train. The edge of this passenger’s coat was then trapped when the doors closed again and she was unable to free it.

The trapped coat was not large enough to be detected by the door control system and the train operator, who was unaware of the situation, started the train moving. While checking the platform camera views displayed in his cab, the train operator saw unusual movements on the platform and applied the train brakes. Before the train came to a stop, the trapped passenger fell to the ground and then, having become separated from her coat, fell into the gap between the platform and the train. The train stopped after travelling about 60 metres. The passenger suffered injuries to her arm, head and shoulder, and was taken to hospital.

As a result of this accident, RAIB has made one recommendation, addressed to London Underground, seeking further improvements in the processes used to manage risks at the platform-train interface.

RAIB has also identified one learning point for the railway industry, relating to the provision of under platform recesses as a measure to mitigate the consequences of accidents where passengers fall from the platform.

For the complete report, see:

R042016_160309_Clapham_South

Monday Accident & Lessons Learned: IOGP Safety Alert – Dropped Object

March 28th, 2016 by

NewImage

IOGP SAFETY ALERTDROPPED OBJECT: 1.3 POUND LINK PIN FELL 40 FEET

 

A drilling contractor was tripping pipe out of the hole and a link pin came loose from the hook, falling 40 feet (12.2 metres) to the deck below. The pin bounced and struck a glancing blow to the left jaw/neck area of a worker. The link pin is 1 inch by 5 inches (2.5cm x 12.7cm) and weighs 1.3 pounds (0.6 kg).

What Went Wrong?

The type of keeper pin used on the dropped object did not adequately secure the pin. The link pin is threaded and uses a cotter pin to prevent the pin body from backing out. The pin was secured with a coil “diaper pin” instead of a cotter pin. 

Corrective Actions and Recommendations:

Safety pins that can be knocked out must not be used for lifting operations or securing equipment overhead.

Follow cotter pin installation guidelines:

  • Both points on a cotter pin must be bent around the shaft.
  • Cotter pins are a single-use instrument and should never be re-used.

safety alert number: 271
IOGP Safety Alerts http://safetyzone.iogp.org/

Disclaimer

Whilst every effort has been made to ensure the accuracy of the information contained in this publication, neither the IOGP nor any of its members past present or future warrants its accuracy or will, regardless of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the recipient’s own risk on the basis that any use by the recipient constitutes agreement to the terms of this disclaimer. The recipient is obliged to inform any subsequent recipient of such terms.

This document may provide guidance supplemental to the requirements of local legislation. Nothing herein, however, is intended to replace, amend, supersede or otherwise depart from such requirements. In the event of any conflict or contradiction between the provisions of this document and local legislation, applicable laws shall prevail.

Monday Accident & Lessons Learned: What’s Worse than a Fatal Accident?

March 21st, 2016 by

Screen Shot 2016 02 29 at 12 55 17 PM

What’s worse than a fatal accident? A fatal accident followed by fatalities to first responders or rescuers. 

Six rescuers were recently killed while trying to save 26 miners after a coal mine explosion in Russia. The rescuers were killed when the methane exploded again during their rescue attempt. See:

http://www.nytimes.com/2016/02/29/world/europe/rescue-workers-and-miners-are-killed-in-russia-accident.html?_r=0

Can you learn something about your emergency response and rescue efforts from this example?

Connect with Us

Filter News

Search News

Authors

Angie ComerAngie Comer

Software

Barb CarrBarb Carr

Editorial Director

Chris ValleeChris Vallee

Human Factors

Dan VerlindeDan Verlinde

VP, Software

Dave JanneyDave Janney

Safety & Quality

Garrett BoydGarrett Boyd

Technical Support

Ken ReedKen Reed

VP, Equifactor®

Linda UngerLinda Unger

Co-Founder

Mark ParadiesMark Paradies

Creator of TapRooT®

Per OhstromPer Ohstrom

VP, Sales

Shaun BakerShaun Baker

Technical Support

Steve RaycraftSteve Raycraft

Technical Support

Susan Napier-SewellSusan Napier-Sewell

Marketing & Communications Strategist

Wayne BrownWayne Brown

Technical Support

Success Stories

Fortunately, I already had a plan. I had previously used TapRooT to improve investigations…

Bi-State Development Corporation

Reporting of ergonomic illnesses increased by up to 40% in…

Ciba Vision, a Novartis Company
Contact Us