CSB Final Report, Fatal Propylene Explosion
CSB Releases Final Report on 2020 Fatal Propylene Release and Explosion at the Watson Grinding facility in Houston, Texas.
Today, the U.S. Chemical Safety and Hazard Investigation Board (CSB) released its final investigation report on the 2020 propylene release and explosion at the Watson Grinding facility in Houston, Texas, that fatally injured two workers and a nearby resident and damaged hundreds of neighboring homes. The CSB’s final report highlights two key safety issues: the lack of a comprehensive process safety management program at the Watson Grinding facility to manage the risks of its thermal spray coating operations and an ineffective emergency response plan.
CSB Chairperson Steve Owens said, “Our investigation found that Watson Grinding did not have an effective program in place to assess potential hazards in its propylene process and did not have a mechanical integrity program or written operating procedures. This tragic incident was made even worse due to the lack of emergency response training for employees at the facility. Three lives were lost, and the surrounding community was put at risk as a result.”
The incident occurred shortly after 4:30 am on January 23, 2020, when an accidental release of propylene accumulated and exploded inside the building at Watson Grinding. The CSB found that prior to the incident, a hose disconnected from its fitting inside a coating booth and released propylene, a flammable hydrocarbon vapor, which accumulated inside the coating building at Watson Grinding. By the time that employees arrived at the facility early on the morning of January 23, an explosive concentration of propylene had formed inside the building. When one of the employees entered the building and turned on the lights, the flammable vapor ignited, triggering the explosion.
The CSB determined that the cause of the accidental release of propylene was a degraded and poorly crimped rubber welding hose that disconnected from its fitting inside a coating booth, combined with two other circumstances: (1) not closing the manual shutoff valve at the propylene storage tank at the conclusion of production operations the previous workday; and (2) the inoperative automated gas detection alarm, exhaust fan startup, and gas shutoff system.
Investigator-in-Charge Benjamin Schrader said, “As highlighted in our safety issues, Watson Grinding did not effectively train its workers on the hazards of propylene, and on the morning of the incident these workers were not warned to evacuate, instructed to prevent others from entering the area, or informed to contact emergency responders when the propylene release was suspected.”
As a result of its findings, the CSB is issuing recommendations to encourage both companies and standard-setting bodies to share information from the CSB’s report, as well as existing industry guidelines that emphasize the need for an effective process safety management system.
The CSB is an independent federal agency charged with investigating incidents and hazards that result, or may result, in the catastrophic release of extremely hazardous substances. The agency’s core mission activities include conducting incident investigations; determining the cause of the release; formulating preventive or mitigative recommendations based on investigation findings and advocating for their implementation; issuing reports containing the findings, conclusions, and recommendations arising from incident investigations; and conducting studies on chemical hazards.
The agency’s board members are appointed by the president subject to Senate confirmation. The Board does not issue citations or fines but makes safety recommendations to companies, industry organizations, labor groups, and regulatory agencies such as OSHA and EPA.
You may visit the CSB website at www.csb.gov.
Content/Image Source/Credit: CSB, “CSB Releases Final Report on 2020 Fatal Propylene Release and Explosion at the Watson Grinding facility in Houston, Texas,” Washington, D.C., June 29, 2023.
Equifactor® Equipment Troubleshooting and TapRooT® Root Cause Analysis Training
Do you need to efficiently and effectively find the root causes of equipment failures to improve your facility’s equipment reliability? Imagine the downtime prevented, and money saved NOT having repeat equipment failures. If this sounds interesting (and worthwhile), then this completely revised TapRooT´® Equifactor® course is for you.
The Equifactor® Techniques are based on the work of noted equipment reliability expert Heinz Bloch. The tools can be used by maintenance personnel, equipment reliability specialists, maintenance managers, or investigators who don’t have an extensive understanding of equipment engineering.