December 8, 2020 | Mark Paradies

Custom TapRooT® Root Cause Analysis Courses at Your Site

Custom Root Cause Training

You may know about our:

But did you know we can combine elements of these courses with some of our other courses to make a custom course that’s just right for your site?

Ideas for Custom Training

First, you may think that our standard courses are perfect for your folks. That’s great! Hundreds of thousands of people have been trained in our standard courses and learned to use TapRooT® Root Cause Analysis to stop problems at their site.

However, you may have attended many of our other TapRooT® Courses and already have ideas for custom courses at your site. Or you may have only attended one of the courses listed above and are interested in creating the best custom course for your folks but you need some help.

The answer? Your TapRooT® Implementation Advisor can help you design the course that your folks need.

I will provide a few ideas in the sections below.

2-Day + Interviewing

Our standard 2-Day TapRooT® Root Cause Analysis Training is a great way to train your investigators to use TapRooT® RCA to investigate precursor incidents. But this training assumes that your investigators have certain basic skills.

One of those skills is the ability to interview witnesses of the accident. Sometimes people find that their people need help to perform better interviews. To help learn advanced evidence collection and interviewing skills, we created the 2-Day TapRooT® Evidence Collection and Interviewing Techniques to Sharpen Investigation Skills Training.

To make a custom course to teach both the essential TapRooT® Techniques and interviewing skills, we created a custom 3-Day TapRooT® Root Cause Analysis and Interviewing Skills Course.

Your TapRooT® Implementation Advisor can provide more information about this course and provide a quote for conducting the course at your site. CLICK HERE to contact your TapRooT® Implementation Advisor.

2-Day + Software

The 2-Day TapRooT® Root Cause Analysis Training teaches the essential TapRooT® Techniques and provides a brief introduction to the TapRooT® Software. But what if you would like your folks to feel more confident in applying the TapRooT® Software? We can add a day of practice using the software to perform an additional investigation to the 2-Day Course.

This becomes a 3-Day TapRooT® Root Cause Analysis and Software Course.

Your TapRooT® Implementation Advisor can provide more information about this course and provide a quote for conducting the course at your site. CLICK HERE to contact your TapRooT® Implementation Advisor.

Refresher Training + Advanced Skills

Perhaps you have a team of investigators that have been trained in the 2-Day TapRooT® Root Cause Analysis Course but you feel their skills might be getting rusty. We have an idea … refresher training that also includes advanced TapRooT® Skills from the 5-Day Course.

Your TapRooT® Implementation Advisor will work with you to develop a 2-Day Refresher Training that covers the advanced topics that you think will be the most useful for your investigators. Contact your TapRooT® Implementation Advisor to get a quote for conducting the course at your site. CLICK HERE to contact your TapRooT® Implementation Advisor.

1-Day Equifactor® Training

Do you have maintenance personnel who troubleshoot equipment failures and need a more systematic process?

Do you have accident investigators who need to troubleshoot equipment failures as part of a broader investigation?

You are in luck! You can send these folks to a 1-Day Equifactor Troubleshooting Course for fast training on these skills.

They will learn to use Heinz Bloch’s troubleshooting tables to perform a systematic analysis of the equipment failure. This analysis uses the symptoms of the failure to guide the troubleshooting and provides information for further root cause analysis.

The 1-Day Equifactor® Course does not include root cause analysis training (that included in the 2-Day Equifactor® Equipment Troubleshooting and TapRooT® Root Cause Analysis Course. So, if your people already have basic TapRooT® Skills or will be handing over the investigation to others for root cause analysis, this may be the course that you are looking for.

Your TapRooT® Implementation Advisor can provide more information about this course and provide a quote for conducting the course at your site. CLICK HERE to contact your TapRooT® Implementation Advisor.

4-Hour General Employee Training

It would be nice for everyone to attend the 2-Day TapRooT® Course and use it to improve performance in their job. However, 2-days of training for everyone is a major commitment. And you may feel that a general familiarization with the TapRooT® System is all that most folks need.

Thus, we developed a 4-Hour course to introduce employees to TapRooT® Root Cause Analysis. The goals of this course are to:

  • Introduce your employees to the SnapCharT® so they have a better idea of what the investigators are doing when they draw one.
  • Introduce your employees to the Root Cause Tree® so that they understand why investigators ask certain questions and understand that the investigation is not blame oriented.

This course isn’t enough to apply the TapRooT® Techniques but it will help those who are participating in an investigation (for example, being interviewed) understand the process and be more helpful.

Your TapRooT® Implementation Advisor can provide more information about this course and provide a quote for conducting the course at your site. CLICK HERE to contact your TapRooT® Implementation Advisor.

2-Day + Stopping Human Error

The 2-Day TapRooT® Course is a great way to learn the essential TapRoot® Techniques.

The 2-Day Stopping Human Error Course is a great way to learn to stop human errors proactively.

What if you would like to teach your folks to use these tools to both reactively and proactively improve human performance? You need the 3-Day TapRooT® Root Cause Analysis & Stopping Human Error Course.

This fast-paced course will get your folks to understand how to find the root causes of incidents as well as special methods to proactively prevent human errors.

Your TapRooT® Implementation Advisor can provide more information about this course and provide a quote for conducting the course at your site. CLICK HERE to contact your TapRooT® Implementation Advisor.

Get Your Custom Courses Scheduled for 2021

We are working with clients to schedule courses for early 2021. Call your TapRooT® Implementation Advisor at 865-539-2139 or CLICK HERE to contact them.

But hurry! If you want to reserve your preferred dates in the first quarter, you need to get moving!

Categories
Courses & Training
Show Comments

Leave a Reply

Your email address will not be published. Required fields are marked *